ProSafe M4100 and M7100 Managed Switches

a.Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the following displays.

b.In the VLAN ID field, select 200.

c.Click Unit 1. The ports display.

d.Click the gray boxes under ports 4, 5, and 6 until U displays. The U specifies that the egress packet is untagged for the port.

e.Click Apply.

3.Specify the PVID on ports 1/0/4, 1/0/5 and 1/0/6.

a.Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/4, 1/0/5, and 1/0/6 check boxes.

c.In the PVID (1 to 4093) field, enter 200.

d.Click Apply to save the settings.

4.Enable DHCP L2 relay on VLAN 200.

a.Select System > Services > DHCP L2 Relay > DHCP L2 Relay Configuration.

Chapter 29. DHCP L2 Relay and L3 Relay 491

Page 491
Image 491
NETGEAR manual ProSafe M4100 and M7100 Managed Switches