NETGEAR M7100, M4100 manual CLI transport output telnet, Web Interface Configure Telnet

ProSafe M4100 and M7100 Managed Switches

CLI: transport output telnet

(Netgear Switch Routing) (Config)#lineconfig ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Config)#lineconfig

(Netgear Switch Routing) (Line)#transport ?

input	Displays the protocols to use to connect to a
	specific line of the router.
output	Displays the protocols to use for outgoing
	connections from a line.
(Netgear Switch Routing) (Line)#transport output ?
telnet	Allow or disallow new telnet sessions.

(Netgear Switch Routing) (Line)#transport output telnet ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Line)#transport output telnet

(Netgear Switch Routing) (Line)#

Web Interface: Configure Telnet

1.Select Security > Access > Telnet.

336 Chapter 17. Tools