NETGEAR M4100, M7100 manual Web Interface Set Up an IP ACL with Two Rules

ProSafe M4100 and M7100 Managed Switches

2.Define the second rule for ACL 101 to set conditions for UDP traffic similar to those for TCP traffic.

(Netgear Switch) (Config)#access-list 101 permit udp 192.168.77.0 0.0.0.255 192.178.77.0 0.0.0.255

3.Apply the rule to inbound traffic on port 1/0/2. Only traffic matching the criteria will be accepted.

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#ip access-group 101 in (Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#exit

Web Interface: Set Up an IP ACL with Two Rules

1.Create IP ACL 101 on the switch. a. Select Security > ACL > IP ACL.

A screen similar to the following displays.

b.In the IP ACL ID field, enter 101.

c.Click Add to create ACL 101.

2.Create a new rule associated with ACL 101.

a.Select Security > ACL > IP ACL > IP Extended Rules.

Chapter 10. ACLs 139