NETGEAR M4100, M7100 manual CLI Configure the session-limit and session-timeout

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

2.Under Outbound Telnet, for Admin Mode, select the Enable radio button.

3.Click Apply.

CLI: Configure the session-limit and session-timeout

(Netgear Switch Routing) (Line)#session-limit ?

<0-5> Configure the maximum number of outbound telnet sessions allowed.

(Netgear Switch Routing) (Line)#session-limit 5

(Netgear Switch Routing) (Line)#session-timeout ?

<1-160> Enter time in minutes.

(Netgear Switch Routing) (Line)#session-timeout 15

Web Interface: Configure the Session Timeout

1.Select Security > Access > Telnet.

Chapter 17. Tools 337