NETGEAR M7100, M4100 manual CLI Configure DiffServ

ProSafe M4100 and M7100 Managed Switches

CLI: Configure DiffServ

1.Ensure that the DiffServ operation is enabled for the switch.

(Netgear Switch) #config

(Netgear Switch) (Config)#diffserv

2.Create a DiffServ class of type all for each of the departments, and name them. Define the match criteria of source IP address for the new classes.

(Netgear Switch) (Config)#class-map match-all finance_dept

(Netgear Switch) (Config class-map)#match srcip 172.16.10.0 255.255.255.0 (Netgear Switch) (Config class-map)#exit

(Netgear Switch) (Config)#class-map match-all marketing_dept

(Netgear Switch) (Config class-map)#match srcip 172.16.20.0 255.255.255.0 (Netgear Switch) (Config class-map)#exit

(Netgear Switch) (Config)#class-map match-all test_dept

(Netgear Switch) (Config class-map)#match srcip 172.16.30.0 255.255.255.0 (Netgear Switch) (Config class-map)#exit

(Netgear Switch) (Config)#class-map match-all development_dept

(Netgear Switch) (Config class-map)#match srcip 172.16.40.0 255.255.255.0 (Netgear Switch) (Config class-map)#exit

3.Create a DiffServ policy for inbound traffic named 'internet_access', adding the previously created department classes as instances within this policy.

202 Chapter 12. DiffServ