NETGEAR M4100, M7100 manual Create an IPv6 Network Interface

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.In the Interface list, select 1/0/1.

c.In the IPv6 Prefix field, enter 2000::2.

d.In the Length field, enter 64.

e.In the EUI64 field, select Disable.

f.Click Add.

Create an IPv6 Network Interface

The IPv6 network interface is the logical interface used for in-band connectivity with the switch using any of the switch’s front panel ports. The configuration parameters associated with the switch’s network interface do not affect the configuration of the front panel ports through which traffic is switched or routed.

To access the switch over an IPv6 network you must first configure it with IPv6 information (IPv6 prefix, prefix length, and default gateway).

Chapter 27. IPv6 Interface Configuration 425