NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

a.Select Routing > IPv6 > Advanced > Tunnel Configuration. A screen similar to the following displays.

b.In the Tunnel Id list, select 0.

c.In the Mode list, select 6-in-4-configured.

d.In the Source Address field, enter 192.168.1.2.

e.In the Destination Address field, enter 192.168.1.1.

f.Click Apply.

5.Assign an IPv6 address to the tunnel.

a.Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the following displays.

b.In the Interface list, select 0/7/1.

c.In the IPv6 Prefix field, enter 2000::2.

d.In the Length field, enter 64.

e.In the EUI64 field, select Disable.

f.Click Add.

Chapter 26. Tunnel 421