NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

5.Configure a source interface.

a.Select Switching > MVR > Basic > MVR Interface Configuration. A screen similar to the following displays:

b.Under MVR Interface Configuration, scroll down and select the Interface 0/9 check box.

c.Enter the following information:

•In the Admin Mode list, select Enable.

•In the Type list, select source.

d.Click Apply to save the settings.

6.After port 1 receives an IGMP report for multicast group 224.1.2.3, it is added into MVR group 224.1.2.3.

a.Select Switching > MVR > Advanced > MVR Group Membership. A screen similar to the following displays:

268 Chapter 14. MVR (Multicast VLAN Registration)