NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

b.Enter the following information:

•In the Group Name field, enter vlan_ip.

•In the Protocol list, select IP and ARP while holding down the Ctrl key.

•In the VLAN field, enter 5.

c.Click Add.

3.Add port 11 to the group vlan_ipx.

a.Select Switching > VLAN > Advanced > Protocol Based VLAN Group Membership.

A screen similar to the following displays.

b.In the Group ID list, select 1.

c.Click the gray box under port 11. A check mark displays in the box.

d.Click the Apply button.

4.Add port 11 to the group vlan_ip.

a.Select Switching > VLAN > Advanced > Protocol Based VLAN Group Membership.

A screen similar to the following displays.

b.In the Group ID list, select 2.

c.Click the gray box under port 11. A check mark displays in the box.

d.Click Apply.

30 Chapter 2. VLANs