NETGEAR M4100, M7100 manual CLI Enable iSCSI Awareness with Dscp, Select Switching iSCSI Basic

ProSafe M4100 and M7100 Managed Switches

Enable iSCSI Awareness with DSCP

The example is shown as CLI commands and as Web interface procedure.

CLI: Enable iSCSI Awareness with DSCP

Use the following commands to enable iSCSI awareness, select DSCP, and set DSCP queue number and aging time.

(Netgear Switch)	#config
(Netgear Switch)	(Config) #iscsi enable
(Netgear Switch)	(Config) #iscsi cos dscp 46
(Netgear Switch)	(Config) #iscsi aging time 10
(Netgear Switch)	(Config) #exit

Web Interface: Enable iSCSI Awareness with DSCP

1.Enable iSCSI awareness, select DSCP, and set the DSCP queue number and aging time.

a. Select Switching > iSCSI > Basic.

A screen similar to the following displays..

b.Enter the following information:

•In the iSCSI Status, select Enable.

•In the QoS Profile, select DSCP.

•In the DSCP, select 46 (default value).

•In the remark, select Enable (default value).

•In the iSCSI Aging Time, enter 10 (default value).

2.Click Apply to save the settings.

Chapter 33. iSCSI 553