ProSafe M4100 and M7100 Managed Switches

In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

2.Assign IP address 192.150.3.1/24 to interface 1/0/3.

a.Select Routing > Advanced >IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 1/0/3 check box. Now 1/0/3 appears in the Interface field at the top.

c.Enter the following information:

In the IP Address field, enter 192.150.3.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

RIP for the Switch

Note: Unless you have previously disabled RIP, you can skip this step since RIP is enabled by default.

78 Chapter 6. RIP

Page 78
Image 78
NETGEAR M7100, M4100 manual RIP for the Switch