NETGEAR M7100 Create a Static Address, Select the Convert Dynamic Address to Static check box

ProSafe M4100 and M7100 Managed Switches

CLI: Convert the Dynamic Address Learned from 1/0/1 to the Static Address

(Netgear Switch)(Interface 1/0/1)#port-security mac-address move Convert the dynamic address learned from 1/0/1 to the static address (Netgear Switch)(Interface 1/0/1)#exit

(Netgear Switch)(Config)#exit

(Netgear Switch)#show port-security static 1/0/1 Number of static MAC addresses configured: 3 Statically configured MAC Address VLAN ID

---------------------------------------------

00:0E:45:30:15:F3 1 00:13:46:EC:2F:62 1 00:14:6C:E8:81:23 1

Web Interface: Convert the Dynamic Address Learned from 1/0/1 to the Static Address

1.Select Security > Traffic Control > Port Security > Dynamic MAC Address. A screen similar to the following displays.

2.Under Port Security Configuration, in the Port List field, select 1/0/1.

3.Select the Convert Dynamic Address to Static check box.

4.Click Apply to save the settings.

Create a Static Address

The example is shown as CLI commands and as a Web interface procedure.

272 Chapter 15. Security Management