NETGEAR M7100, M4100 manual Enable iSCSI Awareness with Vlan Priority Tag

ProSafe M4100 and M7100 Managed Switches

Enable iSCSI Awareness with VLAN Priority Tag

The example is shown as CLI commands and as Web interface procedure

CLI: Enable iSCSI Awareness with VLAN Priority Tag

Use the following commands to enable iSCSI awareness, select VPT, and set VLAN number and aging time.

(Netgear Switch)	#config
(Netgear Switch)	(Config) #iscsi enable
(Netgear Switch)	(Config) #iscsi cos vpt 5
(Netgear Switch)	(Config) #iscsi aging time 10
(Netgear Switch)	(Config) #exit

Web Interface: Enable iSCSI Awareness with VLAN Priority Tag

1.1.Enable iSCSI awareness, select VPT, and set VLAN number and aging time. a. Select Switching > iSCSI > Basic.

A screen similar to the following displays.

b.b.Enter the following information:

•"In the iSCSI Status, select Enable.

•"In the QoS Profile, select VLAN Priority Tag.

•"In the VLAN Priority Tag, select 5 (default value).

•"In the remark, select Enable (default value).

•"In the iSCSI Aging Time, enter 10 (default value).

c.Click Apply.

552 Chapter 33. iSCSI