NETGEAR M7100, M4100 manual Web Interface Configure a Dhcp L3 Relay

ProSafe M4100 and M7100 Managed Switches

3.Create a routing interface connecting to the client.

(Netgear Switch) (Config)#

(Netgear Switch) (Config)#interface 1/0/16 (Netgear Switch) (Interface 1/0/16)#routing

(Netgear Switch) (Interface 1/0/16)#ip address 10.200.2.1 255.255.255.0 (Netgear Switch) (Interface 1/0/16)#exit

4.Configure the DHCP Server IP address and enable the DHCP L3 relay.

(Netgear Switch) (Config)#ip helper-address 10.100.1.1 dhcp (Netgear Switch) (Config)#ip helper enable

5.Redistribute 10.200.1.0/24 and 10.200.2.0/24 to the RIP such that RIP adviertises this route to the DHCP server.

(Netgear Switch) (Config)#

(Netgear Switch) (Config)#router rip

(Netgear Switch) (Config-router)#redistribute connected (Netgear Switch) (Config-router)#exit

Web Interface: Configure a DHCP L3 Relay

1.Enable routing mode on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply.

2.Create a routing interface and assign 10.100.1.2/24 to it.

a.Select Routing > IP > Advanced > IP Interface Configuration.

500 Chapter 29. DHCP L2 Relay and L3 Relay