NETGEAR M7100, M4100 manual Outbound Telnet, This section, the following examples are provided

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Under Dual Image Configuration, scroll down and select the Image 2 check box. The image2 now appears in the Image name field at the top.

c.In the Active Image field, select TRUE.

d.Click Apply.

Outbound Telnet

In this section, the following examples are provided:

•CLI: show network on page 335

•CLI: transport output telnet on page 336

•Web Interface: Configure Telnet on page 336

•CLI: Configure the session-limit and session-timeouton page 337

•Web Interface: Configure the Session Timeout on page 337

Outbound Telnet:

•Establishes an outbound Telnet connection between a device and a remote host.

•A Telnet connection is initiated, each side of the connection is assumed to originate and terminate at a network virtual terminal (NVT).

•Server and user hosts do not maintain information about the characteristics of each other’s terminals and terminal handling conventions.

•Must use a valid IP address.

334 Chapter 17. Tools