ProSafe M4100 and M7100 Managed Switches

multicast streams for clients in different VLANs. A diagram of a network configured for MVR is shown in the following illustration. SP is the source port and RP is the receiver port.

Multicast source

 

IGMP (GSM7328Sv2)

 

SP (VLAN999)

SP (VLAN 999)

 

MVR (GSM7212P)

RP (VLAN 1001)

RP (VLAN 1003)

 

RP (VLAN 1002)

Multicast client

Multicast client

 

Multicast client

Figure 27. Network configured for MVR

Note: The following examples show how to configure the MVR on the

MVR switch (GSM7212P in this case).

Configure MVR in Compatible Mode

In compatible mode, the MVR switch does not learn multicast groups; the groups have to be configured by the operator as the MVR does not forward IGMP reports from the hosts (RP port) to the IGMP router (SP port). To operate in this mode, the IGMP router has to be statically configured to transmit all required multicast streams to the MVR switch.

256 Chapter 14. MVR (Multicast VLAN Registration)

Page 256
Image 256
NETGEAR M7100, M4100 manual Configure MVR in Compatible Mode, MVR switch GSM7212P in this case