NETGEAR M7100, M4100 manual Configure Switch GSM7328S2

ProSafe M4100 and M7100 Managed Switches

Configure Switch GSM7328S_2

(Netgear Switch) #show interfacet tunnel 0
Interface Link Status	Up
IPv6 is enabled
IPv6 Prefix is	FE80::C0A8:101/128
	2000::1/64
MTU size	1280 bytes

#show interface tunnel
TunnelId	Interface	TunnelMode	SourceAddress	DestinationAddress
--------	---------	----------	-------------	------------------
0	tunnel 0	6 in 4 Configured	192.168.1.1	192.168.1.2

(Netgear Switch) # ping ipv6 2000::2

Send count=3, Receive count=3 from 2000::2 Average round trip time = 1.00 ms

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#ipv6 forwarding (Netgear Switch) (Config)#ipv6 unicast-routing (Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#routing

(Netgear Switch) (Interface 1/0/13)#ip address 192.168.1.2 255.255.255.0 (Netgear Switch) (Interface 1/0/13)#exit

(Netgear Switch) (Config)#interface tunnel 0 (Netgear Switch) (Interface tunnel 0)#ipv6 enable

(Netgear Switch) (Interface tunnel 0)#ipv6 address 2000::2/64 (Netgear Switch) (Interface tunnel 0)#tunnel mode ipv6ip (Netgear Switch) (Interface tunnel 0)#tunnel source 192.168.1.2 (Netgear Switch) (Interface tunnel 0)#tunnel destination 192.168.1.1 (Netgear Switch) (Interface tunnel 0)#exit

(Netgear Switch) (Config)#exit (Netgear Switch) #show interface tunnel

TunnelId	Interface	TunnelMode	SourceAddress	DestinationAddress
--------	---------	----------	-------------	------------------
0 tunnel	0	6 in 4 Configured	192.168.1.2	192.168.1.1

416 Chapter 26. Tunnel