NETGEAR M7100 Web Interface Configure Logging for the Port, Severity Filter list, select Alert

ProSafe M4100 and M7100 Managed Switches

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?

<cr>	Press	Enter to execute	the command.
<severitylevel>	Enter	Logging Severity	Level (emergency0, alert1, critical2,

error3, warning4, notice5, info6, debug7).

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1

(Netgear Switch Routing) #show logging hosts

Index	IP Address	Severity	Port	Status
-----	-----------------	----------	----	-------------
1	192.168.21.253	alert	4	Active

Web Interface: Configure Logging for the Port

1.Select Monitoring > Logs > Sys Log Configuration. A screen similar to the following displays.

2.Enter the following information:

•In the Host Address field, enter your host address 192.168.21.253.

•In the Port field, enter 4.

•In the Severity Filter list, select Alert .

3.Click Add.

346 Chapter 18. Syslog