NETGEAR M7100, M4100 manual Enable Dvmrp protocol on the switch, 255

ProSafe M4100 and M7100 Managed Switches

3.Enable DVMRP protocol on the switch.

(Netgear Switch) (Config)#ip dvmrp

4.Enable DVMRP mode on the interfaces 1/0/1, 1/0/13, and 1/0/21.

(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#ip dvmrp
(Netgear Switch) (Interface 1/0/1)#exit
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#ip dvmrp
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#interface 1/0/21
(Netgear Switch) (Interface 1/0/21)#ip dvmrp
(Netgear Switch) (Interface 1/0/21)#exit
(Netgear Switch) #show ip dvmrp neighbor
Interface	1/0/13
Neighbor IP Address	192.168.2.2
State	Active
Up Time (hh:mm:ss)	00:02:40
Expiry Time (hh:mm:ss)	00:00:25
Generation ID	1116347719
Major Version	3
Minor Version	255
Capabilities	Prune GenID Missing 11441
Received Routes	0
Received Bad Packets	0
Received Bad Routes	0
Interface	1/0/21
Neighbor IP Address	192.168.3.1
State	Active
Up Time (hh:mm:ss)	00:01:44
Expiry Time (hh:mm:ss)	00:00:28
Generation ID	1116595047
Major Version	3
Minor Version	255
More Entries or quit(q)
Capabilities	Prune GenID Missing 11441
Received Routes	0
Received Bad Packets	0
Received Bad Routes	0

526 Chapter 31. DVMRP