NETGEAR M7100, M4100 manual Web Interface Configure DiffServ, Class Name field, enter financedept

ProSafe M4100 and M7100 Managed Switches

assign-queue attribute. It is presumed that the switch will forward this traffic to interface 1/0/5 based on a normal destination address lookup for Internet traffic.

(Netgear Switch) (Config)#interface 1/0/5

(Netgear Switch) (Interface 1/0/5)#cos-queue min-bandwidth 0 25 25 25 25 0 0 0 (Netgear Switch) (Interface 1/0/5)#exit

(Netgear Switch) (Config)#exit

Web Interface: Configure DiffServ

1.Enable Diffserv.

a. Select QoS > DiffServ > Basic > DiffServ Configuration. A screen similar to the following displays.

b.For Diffserv Admin Mode, select the Enable radio button.

c.Click Apply to save the settings.

2.Create the class finance_dept.

a.Select QoS > DiffServ > Advanced > Class Configuration. A screen similar to the following displays.

b.Enter the following information:

•In the Class Name field, enter finance_dept.

•In the Class Type list, select All.

c.Click Add to create a new class finance_dept.

204 Chapter 12. DiffServ