NETGEAR M4100, M7100 manual Web Interface Create a Protocol-Based Vlan

ProSafe M4100 and M7100 Managed Switches

5.Enable protocol VLAN group 1 and 2 on the interface.

(Netgear Switch)(Vlan)#exit (Netgear Switch)#config

(Netgear Switch)(Config)#interface 1/0/11

(Netgear Switch)(Interface 1/0/11)#protocol vlan group 1 (Netgear Switch)(Interface 1/0/11)#protocol vlan group 2 (Netgear Switch)(Interface 1/0/11)#exit

Web Interface: Create a Protocol-Based VLAN

1.Create the protocol-based VLAN group vlan_ipx.

a.Select Switching > VLAN > Advanced > Protocol Based VLAN Group Configuration.

A screen similar to the following displays.

Enter the following information:

•In the Group Name field, enter vlan_ipx.

•In the Protocol list, select IPX.

•In the VLAN ID field, enter 4.

b.Click Add.

2.Create the protocol-based VLAN group vlan_ip.

a.Select Switching > VLAN >Advanced > Protocol Based VLAN Group Configuration.

A screen similar to the following displays.

Chapter 2. VLANs 29