NETGEAR M7100, M4100 manual Remote ID String field, enter rmtid

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.For Admin Mode, select the Enable radio button.

c.Scroll down and select the VLAN ID 200 check box.

d.Enter the following information:

•In the Admin Mode field, select Enable.

•In the Circuit ID Mode field, select Enable.

•In the Remote ID String field, enter rmt_id.

e.Click Apply to save the settings.

5.Enable DHCP L2 Relay on interfaces 1/0/4,1/0/5, and 1/0/6.

a.Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Configuration.

A screen similar to the following displays.

b.Scroll down and select the 1/0/4, 1/0/5, and 1/0/6 check boxes.

c.In the Admin Mode field, select Enable.

d.Click Apply to save the settings.

6.Enable DHCP L2 relay trust on interface 1/0/6.

492 Chapter 29. DHCP L2 Relay and L3 Relay