NETGEAR M4100, M7100 manual Control Mode list, select Force Authorized

ProSafe M4100 and M7100 Managed Switches

c.In the VLAN Type field, select Static.

d.Click Add.

2.Add ports to VLAN 2000.

a.Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the following displays.

b.In the VLAN ID list, select 2000 .

c.Click Unit 1. The ports display.

d.Click the gray boxes under ports 1 and 24 until U displays. The U specifies that the egress packet is untagged for the port.

e.Click Apply.

3.Set force authorized mode on ports 1/0/6 and 1/0/12.

a.Select Security > Port Authentication > Advanced > Port Authentication. A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/6 and 1/0/12, check boxes.

c.In the Control Mode list, select Force Authorized.

d.Click Apply to save settings.

4.Enable dot1x on the switch.

Chapter 15. Security Management 289