ProSafe M4100 and M7100 Managed Switches

CLI: Configure a DHCP Reservation

(Netgear Switch)#config

(Netgear Switch) (Config)#service dhcp

(Netgear Switch) (Config)#ip dhcp pool pool_manual (Netgear Switch) (Config)#client-name dhcpclient

(Netgear Switch) (Config)#hardware-address 00:01:02:03:04:05 (Netgear Switch) (Config)#host 192.168.200.1 255.255.255.0 (Netgear Switch) (Config)#client-identifier 01:00:01:02:03:04:05

Note: The unique identifier is a concatenation of the media type and MAC addresses. For example, the Microsoft client identifier for Ethernet address c8:19:24:88:f1:77 is 01:c8:19:24:88:f1:77, where 01 represents the Ethernet media type. For more information, see the “Address Resolution Protocol Parameters” section of RFC 1700.

Web Interface: Configure a DHCP Reservation

1.Select System > Services > DHCP Server > DHCP Server Configuration. A screen similar to the following displays.

2.For Admin Mode, select the Enable radio button.

3.Click Apply to enable the DHCP service.

4.Select System > Services > DHCP Server > DHCP Pool Configuration.

Chapter 22. DHCP Server 385

Page 385
Image 385
NETGEAR M4100, M7100 manual CLI Configure a Dhcp Reservation, Web Interface Configure a Dhcp Reservation