NETGEAR M7100, M4100 manual IP Address field, enter Subnet Mask field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Port 1/0/9 check box. Now 1/0/9 appears in the Port field at the top.

c.Enter the following information :

•In the IP Address field, enter 192.168.3.1.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply.

4.Configure 1/0/13 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Under IP Interface Configuration, scroll down and select the Port 1/0/13 check box. Now 1/0/13 appears in the Port field at the top.

c.Enter the following information:

442 Chapter 28. PIM