ProSafe M4100 and M7100 Managed Switches

Web Interface: Configure DVMRP

DVMRP on Switch A

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic >IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply.

2.Configure 1/0/1 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the Port 1/0/1 check box. Now 1/0/1 appears in the Port field at the top.

c.Enter the following information:

In the IP Address field, enter 192.168.1.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Configure 1/0/13 as a routing port and assign an IP address to it.

Chapter 31. DVMRP 531

Page 531
Image 531
NETGEAR M4100, M7100 manual Web Interface Configure Dvmrp, Dvmrp on Switch a