ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.For PIM Protocol Type, select the PIM-DMradio button.

c.For Admin Mode, select the Enable radio button.

d.Click Apply.

8.Enable PIM-DM on interfaces 1/0/21 and 1/0/22.

a.Select Routing > Multicast > PIM > Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the 1/0/21 and 1/0/22 check boxes.

c.In the PIM Interface Configuration, in the Admin Mode field, select Enable.

d.Click Apply to save the settings.

PIM-DM on Switch D:

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration.

Chapter 28. PIM 453

Page 453
Image 453
NETGEAR M4100, M7100 manual PIM-DM on Switch D