NETGEAR M7100, M4100 manual IP address, enter Subnet Mask field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Port 1/0/21 check box. Now 1/0/21 appears in the Interface field at the top.

c.Enter the following information:

•In the IP address, enter 192.168.5.2.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Configure 1/0/22 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the 1/0/22 check box. Now 1/0/22 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.168.6.1.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

4.Enable RIP on the interface 1/0/21.

476 Chapter 28. PIM