ProSafe M4100 and M7100 Managed Switches

a.Select Maintenance > Reset > Device Reboot. A screen similar to the following displays.

b.In the Reboot Unit No. list, select 2.

c.Click Apply.

3.On Switch B, configure a stack port as an Ethernet port

a.Select System > Stacking > Advanced > Stack Port Configuration. A screen similar to the following displays.

b.Under Stack Port Configuration, scroll down and select the 1/0/51 check box.

c.In the Configured Stack Mode list, select Ethernet.

d.Click Apply to save the settings.

4.Reboot the switch.

a.Select Maintenance > Reset > Device Reboot. A screen similar to the following displays.

b.In the Reboot Unit No. list, select 1 .

c.Click Apply.

358 Chapter 19. Switch Stacks

Page 358
Image 358
NETGEAR manual ProSafe M4100 and M7100 Managed Switches