NETGEAR M7100, M4100 CLI Configure DiffServ for IPv6, Define matching criteria as protocol ICMPv6

ProSafe M4100 and M7100 Managed Switches

CLI: Configure DiffServ for IPv6

The script in this section shows how to prioritize ICMPv6 traffic over other IPv6 traffic.

1.Create the IPv6 class classicmpv6.

(Netgear Switch) (Config)# class-map match-all classicmpv6 ipv6

2.Define matching criteria as protocol ICMPv6.

(Netgear Switch) (Config-classmap) # match protocol 58 (Netgear Switch) (Config-classmap) # exit

3.Create the policy policyicmpv6.

(Netgear Switch) (Config)# policy-map policyicmpv6 in

4.Associate the previously created class classicmpv6.

(Netgear Switch) (Config-policy-map)# class classicmpv6

5.Set the attribute as assign queue 6.

(Netgear Switch) (Config-policy-classmap)# assign-queue 6 (Netgear Switch) (Config-policy-map)# exit

6.Attach the policy policy_icmpv6 to interfaces 1/0/1,1/0/2 and 1/0/3:

(Netgear Switch) (Config)# interface 1/0/1

(Netgear Switch) (Interface 1/0/1)# service-policy in policyicmpv6 (Netgear Switch) (Interface 1/0/1)# exit

(Netgear Switch) (Config)# interface 1/0/2

(Netgear Switch) (Interface 1/0/2)# service-policy in policyicmpv6 (Netgear Switch) (Interface 1/0/2)# exit

(Netgear Switch) (Config)# interface 1/0/3

(Netgear Switch) (Interface 1/0/3)# service-policy in policyicmpv6 (Netgear Switch) (Interface 1/0/3)# exit

230 Chapter 12. DiffServ