NETGEAR M4100, M7100 manual Web Interface Configure Vrrp on a Master Router

ProSafe M4100 and M7100 Managed Switches

Web Interface: Configure VRRP on a Master Router

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply to save the settings.

2.Assign the IP address 192.150.2.1 to port 1/0/2:

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/2 check box. Now 1/0/2 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.150.2.1.

•In the Network Mask field, enter 255.255.0.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Enable VRRP on port 1/0/2.

a.Select Routing > VRRP > Advanced > VRRP Configuration.

Chapter 9. VRRP 131