ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply.

2.Configure 1/0/1 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 1/0/1 check box. Now 1/0/1 appears in the Interface field at the top.

c.Enter the following information:

In the IP Address field, enter 192.168.2.2.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Configure 1/0/9 as a routing port and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration.

466 Chapter 28. PIM

Page 466
Image 466
NETGEAR M7100, M4100 manual IP Address field, enter Subnet Mask field, enter