NETGEAR M4100, M7100 manual Show Sntp CLI Only, Simple Network Time Protocol, Show sntp

16. SNTP	16
Simple Network Time Protocol

This chapter provides the following examples:

•Show SNTP (CLI Only)

•Configure SNTP on page 319

•Set the Time Zone (CLI Only) on page 321

•Set the Named SNTP Server on page 321

The SNTP feature offers these benefits:

•It can be used to synchronize network resources and for adaptation of NTP.

•SNTP provides synchronized network timestamp.

•It can be used in broadcast or unicast mode.

•It supports SNTP client implemented over UDP, which listens on port 123.

Show SNTP (CLI Only)

The following are examples of the commands used in the SNTP feature.

show sntp

(Netgear Switch Routing) #show sntp?

<cr>	Press Enter to execute the command.
client	Display	SNTP	Client Information.
server	Display	SNTP	Server Information.

Chapter 16. SNTP 317