NETGEAR M4100, M7100 manual CLI Configure Multiple STP 802.1s

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Under CST Port Configuration, scroll down and select the Interface 1/0/3 check box. Now 1/0/3 appears in the Interface field at the top.

c.In the Port Mode field, select Enable.

d.Click Apply.

Configure Multiple STP (802.1s)

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure Multiple STP (802.1s)

(Netgear switch) (Config)#	spanning-tree
(Netgear switch) (Config)#	spanning-tree forceversion		802.1s
(Netgear switch) (Config)# spanning-tree mst instance			1
Create a mst instance 1
(Netgear switch) (Config)# spanning-tree mst priority			1	4096
(Netgear switch) (Config)# spanning-tree mst vlan		1 2
(Netgear switch) (Config)# spanning-tree mst vlan		1 3
Associate the mst instance	1 with the VLAN 2 and 3
(Netgear switch) (Config)# spanning-tree mst instance			2
Create a mst instance 2
(Netgear switch) (Config)# spanning-tree mst priority			2	4096
(Netgear switch) (Config)# spanning-tree mst vlan		2 11
(Netgear switch) (Config)# spanning-tree mst vlan		2 12
Associate the mst instance	2 with the VLAN 11 and	12
(Netgear switch) (Interface 1/0/3)# spanning-tree		mst	1	port-priority 128
(Netgear switch) (Interface 1/0/3)# spanning-tree		mst	1	cost 0

Chapter 25. Spanning Tree Protocol 411