ProSafe M4100 and M7100 Managed Switches

2.Add an IPv6 gateway to the network interface.

a.Select System > Management > Network Interface > IPv6 Network Configuration.

A screen similar to the following displays.

b.In the IPv6 Gateway field, enter 2001:1::2.

c.Click Apply.

Create an IPv6 Routing VLAN

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create an IPv6 Routing VLAN

1.Create a routing VLAN with VLAN ID 500.

Netgear Switch) (Vlan)#vlan 500 (Netgear Switch) (Vlan)#vlan routing 500 (Netgear Switch) (Vlan)#exit

2.Add interface 1/0/1 to VLAN 500.

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/1

(Netgear Switch) (Interface 1/0/1)#vlan participation include 500 (Netgear Switch) (Interface 1/0/1)#vlan participation pvid 500 (Netgear Switch) (Interface 1/0/1)#exit

Chapter 27. IPv6 Interface Configuration 427

Page 427
Image 427
NETGEAR M4100, M7100 manual CLI Create an IPv6 Routing Vlan, IPv6 Gateway field, enter