ProSafe M4100 and M7100 Managed Switches

To delete the static route, simply add “no” keyword in the front of the “ip route” command.

Web Interface: Add a Static Route

1.Select Routing > Routing Table > Basic > Route Configuration to display the Route Configuration screen.

2.In the Route Type list, select Static.

3.Fill in the Network Address field.

Note that this field should have a network IP address, not a host IP address. Do not enter something like 10,100.100.1. The last number should always be 0 (zero).

4.In the Subnet Mask field, enter a value that matches the subnet range that you want to use.

5.The Preference field is optional. A value of 1 is entered by default if you do not enter a number.

6.Click the Add button on the bottom of the screen. The screen is updated with the static route shown in the routing table.

7.To remove a route entry, either static or default, select the check box to the left of the entry, and click the Delete button on the bottom of the screen.

Chapter 4. Port Routing 67

Page 67
Image 67
NETGEAR M4100, M7100 manual Web Interface Add a Static Route