ProSafe M4100 and M7100 Managed Switches

joins a switch stack, its default stack member number changes to the lowest available member number in the stack.

Stack members in the same switch stack cannot have the same stack member number. Every stack member, including a standalone switch, retains its member number until you manually change the number or unless the number is already being used by another member in the stack.

See Renumber Stack Members on page 365.

Stack Member Priority Values

You can change a stack member priority. This is useful if you want to change the master of the stack. Use the following command (in the global config mode):

switch unit priority value

Install and Power-up a Stack

Note: Many switch models such as the GSM7200PS and GSM7300S series have a Hardware Installation Guide that includes additional information about rack mounting and stack cabling.

Compatible Switch Models

NETGEAR stackable managed switches include the following models:

FSM7226RS

FSM7250RS

FSM7328S

FSM7328PS

FSM7352S

FSM7352PS

GSM7328S

GSM7352S

GSM7328FS

GSM7228PS

GSM7252PS

The FSM family, GSM family, and XSM72224S cannot be stacked together at this point.

352 Chapter 19. Switch Stacks

Page 352
Image 352
NETGEAR M7100, M4100 manual Install and Power-up a Stack, Stack Member Priority Values, Compatible Switch Models