NETGEAR M7100 manual Remote Authorization Radius User Configuration, Group field, select Click Add

ProSafe M4100 and M7100 Managed Switches

c.Click Add.

2.Create a user.

a.Select Security > Control > Captive Portal > CP User Configuration. A screen similar to the following displays.

b.Enter the following information:

•In the User ID Field, enter 2.

•In the User Name field, enter user1.

•In the Password field, enter 12345678.

•In the Confirm Password field, enter 12345678.

•In the Group field, select 2.

c.Click Add.

Remote Authorization (RADIUS) User Configuration

A remote RADIUS server can be used for client authentication. In software release 8.0 (or newer), the RADIUS authentication and accounting servers are configured separate from the captive portal configuration. In order to perform authentication and accounting using RADIUS, you configure one or more RADIUS servers and then references the servers using their names in the captive portal configuration. Each captive portal instance can be assigned one RADIUS authentication server and one RADIUS accounting server.

If RADIUS is enabled for a captive portal configuration and no RADIUS servers are assigned, the captive portal activation status will indicate that the instance is disabled with an appropriate reason code.

The following table indicates the RADIUS attributes that are used to configure captive portal users. The table indicates both RADIUS attributes and vendor specific attributes (VSA) that

548 Chapter 32. Captive Portal