NETGEAR M7100, M4100 manual Configuring the Switch, This is a two-part process

ProSafe M4100 and M7100 Managed Switches

4.Create VLAN 200 with port 1/0/48 and assign IP address 192.168.200.1/24.

(Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 200 (Netgear Switch) (Vlan)#vlan routing 200 (Netgear Switch) (Config)#interface 1/0/48 (Netgear Switch) (Interface 1/0/48)#vlan pvid 200

(Netgear Switch) (Interface 1/0/48)#vlan participation include 200 (Netgear Switch) (Interface 1/0/48)#exit

(Netgear Switch) #interface vlan 200 (Netgear Switch) (Interface-vlan 200)#routing

(Netgear Switch) (Interface-vlan 200)#ip address 192.168.200.2 255.255.255.0 (Netgear Switch) (Interface-vlan 200)#exit

5.Add two static routes so that the switch forwards the packets with destinations 192.168.100.0/24 and 192.168.30.0/24 to the correct next hops.

(Netgear Switch) (Config)#ip routing

(Netgear Switch) (Config)#ip route 192.168.100.0 255.255.255.0 192.168.200.1 (Netgear Switch) (Config)#ip route 192.168.30.0 255.255.255.0 192.168.200.1

Web Interface: Configure One-Way Access Using a TCP Flag in an ACL

This is a two-part process:

•Configuring the Switch on page 146

•Configuring the GSM7342S Switch on page 154

Configuring the Switch

1.Create VLAN 30 with IP address 192.168.30.1/24.

a. Select Routing > VLAN > VLAN Routing Wizard.

146 Chapter 10. ACLs