NETGEAR M7100, M4100 manual SSL Certificates, Default-RADIUS-Server

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

2.Scroll down and select the CP 1 check box. Now CP 1 appears in the CP ID field at the top.

3.Enter the following information:

•In the Verification field, select RADIUS.

•In the Radius Auth Server field, enter the RADIUS server name

Default-RADIUS-Server.

4.Click Apply.

SSL Certificates

A captive portal instance can be configured to use the HTTPS protocol during its user verification process. The connection method for HTTPS uses the Secure Sockets Layer (SSL) protocol, which requires a certificate to provide encryption. The certificate is presented to the user at connection time.

In software release 8.0 (or newer), the captive portal uses the same certificate that is used for secure HTTP connections. You can generate this certificate using a CLI command. If a captive portal instance is configured for the HTTPS protocol and there is not a valid certificate present on the system, the captive portal instance status will show Disabled with an appropriate reason code.

550 Chapter 32. Captive Portal