NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

d.Click Apply to save the settings.

5.Specify the router ID, and enable OSPF for the switch.

a.Select Routing > OSPF > Advanced > OSPF Configuration. A screen similar to the following displays.

b.Under OSPF Configuration, enter the following information:

•In the Router ID field, enter 192.130.1.1.

•In the OSPF Admin Mode field, select Enable .

•In the RFC 1583 Compatibility field, select Disable.

c.Click Apply to save the settings.

6.Enable OSPF on the port 1/0/2.

a.Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to the following displays.

b.Under Interface Configuration, scroll down and select the interface 1/0/2 check box. Now 1/0/2 appears in the Interface field at the top.

96 Chapter 7. OSPF