NETGEAR M4100, M7100 manual IP Address field, enter Network Mask field, enter

ProSafe M4100 and M7100 Managed Switches

9.Deny all traffic with the destination IP address 192.168.48.0/24, and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/24

(Netgear Switch) (Interface 1/0/24)#ip access-group 102 in 1 (Netgear Switch) (Interface 1/0/24)#ip access-group 103 in 2 (Netgear Switch) (Interface 1/0/24)#exit

10.Deny all traffic with the destination IP address 192.168.24.0/24, and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#ip access-group 101 in 1 (Netgear Switch) (Interface 1/0/48)#ip access-group 103 in 2 (Netgear Switch) (Interface 1/0/48)#exit

Web Interface: Configure One-Way Access Using a TCP Flag in an ACL

1.Create VLAN 24 with IP address 192.168.24.1.

a.Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays.

b.Enter the following information:

•In the Vlan ID field, enter 24.

•In the IP Address field, enter 192.168.24.1.

•In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display.

d.Click the gray box under port 24 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 24.

2.Create VLAN 48 with IP address 192.168.48.1.

Chapter 10. ACLs 161