NETGEAR M7100, M4100 Group Mask field, enter, Click Add Set up the BSR candidate configuration

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the Interface 1/0/10 and 1/0/11 check boxes.

c.In the Admin Mode field, select Enable.

d.Click Apply to save the settings.

9.Set up the candidate RP configuration.

a.Select Routing > Multicast > PIM > Candidate RP Configuration. A screen similar to the following displays.

b.In the Interface list, select 1/0/11.

c.In the Group IP field, enter 225.1.1.1.

d.In the Group Mask field, enter 255.255.255.0.

e.Click Add.

10.Set up the BSR candidate configuration.

474 Chapter 28. PIM