NETGEAR M4100, M7100 manual IP Address field, enter Network Mask field, enter

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.n the VLAN Routing Wizard,

b.In the VLAN Routing Wizard, enter the following information:

•In the Vlan ID field, enter 30.

•In the IP Address field, enter 192.168.30.1.

•In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display.

d.Click the gray box under port 35 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 30.

2.Create VLAN 100 with IP address 192.168.100.1/24.

a.Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays.

b.Enter the following information:

• In the Vlan ID field, enter 100.

Chapter 10. ACLs 147