NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

3.Add multicast group 224.1.2.3 to the MVR.

a.Select Switching > MVR > Basic > MVR Group Configuration. A screen similar to the following displays:

b.In the MVR Group IP field, enter 224.1.2.3.

c.Click Add.

4.Configure a receiver on interface 0/1, 0/5 and 0/7.

a.Select Switching > MVR > Basic > MVR Interface Configuration. A screen similar to the following displays:

b.Under MVR Interface Configuration, scroll down and select the Interface 0/1, 0/5 and 0/7 check boxes

c.Enter the following information:

•In the Admin Mode list, select Enable.

•In the Type list, select Receiver.

d.Click Apply to save the settings.

Chapter 14. MVR (Multicast VLAN Registration) 267