NETGEAR M7100, M4100 manual Select Routing Routing Table Basic Route Configuration

ProSafe M4100 and M7100 Managed Switches

d.Click the gray box under port 25 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 50.

3.Create VLAN 200 with IP address 192.168.200.2/24.

a.Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays.

b.Enter the following information:

•In the Vlan ID field, enter 200.

•In the IP Address field, enter 192.168.200.2.

•In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display.

d.Click the gray box under port 48 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 200.

4.Create a static route with IP address 192.168.100.0/24:

a.Select Routing > Routing Table > Basic > Route Configuration.

156 Chapter 10. ACLs