NETGEAR M4100, M7100 manual Admin Mode field, select Enable

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Scroll down and select the interface 1/0/3 check box. Now 1/0/3 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.130.3.1.

•In the Network Mask field, enter 255.255.255.0.

•In the Admin Mode field, select Enable.

d.Click Apply to save the settings.

4.Assign IP address 192.64.4.1 to port 1/0/4.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 1/0/4 check box. Now 1/0/4 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.64.4.1.

•In the Network Mask field, enter 255.255.255.0.

•In the Admin Mode field, select Enable.

Chapter 7. OSPF 95