NETGEAR M4100, M7100 manual Web Interface Configure Area 1 as an nssa Area on A2

ProSafe M4100 and M7100 Managed Switches

Web Interface: Configure Area 1 as an nssa Area on A2

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply to save the settings.

2.Assign IP address 192.168.30.1 to port 1/0/11.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 1/0/11 check box. Now 1/0/11 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.168.30.1.

•In the Network Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

d.Click Apply to save the settings.

3.Assign IP address 192.168.20.2 to port 1/0/15.

a.Select Routing > IP > Advanced > IP Interface Configuration.

Chapter 7. OSPF 113