NETGEAR M4100, M7100 manual Assign an IPv6 address to interface 1/0/1

ProSafe M4100 and M7100 Managed Switches

2. Assign an IPv6 address to interface 1/0/1.
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#ipv6 enable
(Netgear Switch) (Interface 1/0/1)#ipv6 address	2000::2/64
(Netgear Switch) (Interface 1/0/1)#routing
(Netgear Switch) (Interface 1/0/1)#exit
(Netgear Switch) #ping ipv6 2000::2
Send count=3, Receive count=3 from 2000::2
Average round trip time = 1.00 ms
(Netgear Switch) #show ipv6 brief
IPv6 Forwarding Mode	Enable
IPv6 Unicast Routing Mode	Enable
IPv6 Hop Limit	0
ICMPv6 Rate Limit Error Interval	1000 msec
ICMPv6 Rate Limit Burst Size	100 messages
Maximum Routes	12
(Netgear Switch) #show ipv6 interface 1/0/1
IPv6 is enabled
IPv6 Prefix is	FE80::21E:2AFF:FED9:249B/128
	2000::2/64 [TENT]
Routing Mode	Enabled
Administrative Mode	Enabled
IPv6 Routing Operational Mode	Enabled
Bandwidth	1000000 kbps
Interface Maximum Transmit Unit	1500
Router Duplicate Address Detection Transmits...	1
Router Advertisement NS Interval	0
Router Advertisement Lifetime	1800
Router Advertisement Reachable Time	0
Router Advertisement Interval	600
Router Advertisement Managed Config Flag	Disabled
Router Advertisement Other Config Flag	Disabled
Router Advertisement Suppress Flag	Disabled
IPv6 Destination Unreachables	Enabled
Prefix 2000::2/64
Preferred Lifetime	604800
Valid Lifetime	2592000
Onlink Flag	Enabled
Autonomous Flag	Enabled

Chapter 27. IPv6 Interface Configuration 423