NETGEAR M7100, M4100 Create Three VLANs, CLI Create Three Vlans, Web Interface Create Three Vlans

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

b.Under PVID Configuration, scroll down and select the check box for Interface 1/0/1. Then scroll down and select the Interface 1/0/2 check box.

c.Enter the following information:

•In the Acceptable Frame Type polyhedron list, select VLAN Only.

•In the PVID (1 to 4093) field, enter 2.

d.Click Apply to save the settings.

Create Three VLANs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create Three VLANS

Use the following commands to create three VLANs and to assign the VLAN IDs while leaving the names blank.

(Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 100 (Netgear Switch) (Vlan)#vlan 101 (Netgear Switch) (Vlan)#vlan 102 (Netgear Switch) (Vlan)#exit

Web Interface: Create Three VLANS

1.Create VLAN100.

a. Select Switching > VLAN > Basic > VLAN Configuration.

20 Chapter 2. VLANs